论文部分内容阅读
High-rate GPS data from the United States continuously operating reference stations in the Alaska region are processed using the recently developed precise point positioning(PPP) technique. The traditional PPP technique does not fix ambiguities into their integers because these ambiguities do not have an integer nature when data from a single receiver, as well as precise orbit and clock corrections, are used. Additional corrections, i.e.,uncalibrated phase delay(UPD), are needed to fix integer ambiguities and consequently improve positioning accuracy. This study proposes a methodology to compute for wide-lane and L2(the second L-band frequency) UPDs using the geometry-based model and subsequently applies these parameters to the computation for ambiguity-fixed solutions. The instantaneous displacements of near-field sites, as well as the permanent deformations after the earthquake, are therefore obtained for the January 5, 2013,Alaska earthquake. The real-time performance of PPP solutions are assessed by considering realistic data latency and data interval of corrections. Ambiguity-fixed solutions are compared with ambiguity-float ones. The comparison shows that the positioning accuracy can be improved significantly when the ambiguities are fixed correctly. Thesolutions using the real-time corrections are also compared with those using post-processing corrections, i.e., Center for Orbit Determination in Europe final orbit and clock.Although the accuracy is somehow degraded because of the data latency and data interval, the real-time results are satisfactory for use in monitoring the small-scale deformation(1–2 cm) caused by the Alaska earthquake. In addition, the kinematic ambiguity-fixed PPP solutions for7 days around the earthquake are calculated to obtain permanent pre- and post-earthquake deformations. The deformations computed from real-time and post-processing corrections do not appear to be significantly different.
High-rate GPS data from the United States continuously operating reference stations in the Alaska region are processed using the recently developed precise point positioning (PPP) technique. The traditional PPP technique does not fix ambiguities into their integers because these ambiguities do not have an integer Nature when data from a single receiver, as well as precise orbit and clock corrections, are used. Additional corrections, ie, uncalibrated phase delay (UPD), are needed to fix integer ambiguities and b improvet improve positioning accuracy. compute for wide-lane and L2 (the second L-band frequency) UPDs using the geometry-based model and subsequently applied these parameters to the computation for ambiguity-fixed solutions. The instantaneous displacements of near-field sites, as well as the permanent deformations after the earthquake, are therefore obtained for the January 5, 2013, Alaska earthquake. The real-time performance of PPP solutio ns are assessed by considering realistic data latency and data interval of corrections. The comparison shows that the positioning accuracy can be improved significantly when the ambiguities are fixed correctly. Thesolutions using the real-time corrections are also compared with those using post-processing corrections, ie, Center for Orbit Determination in Europe final orbit and clock. Though the accuracy is somehow degraded because of the data latency and data interval, the real-time results are satisfactory for use in monitoring the small-scale deformation (1-2 cm) caused by the Alaska earthquake. In addition, the kinematic ambiguity-fixed PPP solutions for 7 days around the earthquake are calculated to obtain permanent pre- and post-earthquake deformations. The deformations computed from real-time and post-processing corrections do not appear to be significantly different.