论文部分内容阅读
计算机在工作时对使用环境的湿度有一定的要求,湿度过高或过低,都会直接影响计算机系统的工作质量。对此,操作者需要引起重视。 一般情况下,计算机在工作时,使用环境的最佳湿度范围为45％-60％,最大范围不超过35％-80％。如果湿度过高,会引起水蒸气附着于计算机部件的表面,使电路工作性能降低,甚至出现短路而烧毁某些部件。更为严重的是,计算机部件吸进湿空气后,会使磁盘驱动器的部件生锈,发生霉烂而损坏;印刷线路板的绝缘性能也会因此变差;湿度过高还会降低磁性材料
Computer at work on the humidity of the environment have certain requirements, humidity is too high or too low, will have a direct impact on the quality of computer systems work. In this regard, the operator needs to pay attention. Under normal circumstances, the computer at work, the use of the environment the best humidity range of 45% -60%, the maximum range of not more than 35% -80%. If the humidity is too high, it will cause the water vapor to adhere to the surface of the computer components, reducing the workability of the circuit and even short circuiting to burn certain components. More seriously, the computer components sucked into the wet air, it will make the disk drive parts rusty, rotten and damaged; printed circuit board insulation performance will therefore deteriorate; humidity will reduce the magnetic material