Tuning of textural properties of germanosilicate zeolites ITH and IWW by acidic leaching

来源 :能源化学 | 被引量 : 0次 | 上传用户:swfcmoon
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The possibility to adjust textural properties of ITH-and IWWzeolites by the variation of conditions (e.g.temperature,pH,duration) of acidic leaching was shown.While the growth of the temperature of acid treatment caused the increasing amount of leached Ge atoms and enhancing volumes of both micro and mesopores at 80 ℃C,the mesopore volume in ITH (Si/Ge =3.4 and 5.8) and IWW (Si/Ge =3.3) zeolites changed with the duration of the treatment (pH =2;T =80 ℃C) as follows:96 h < 1 h < 24 h.Independently on the chemical composition and zeolite topology,the treatment of germanosilicate zeolites at pH =2-7 resulted in development of both micro and mesoporosity accompanied by the extraction of substantial amount of Ge atoms,while the increasing acidity up to pH =0 resulted in some reduction of Ge extraction and in the development of mesopores at maintained value of micropore volume when compared with initial germanosilicates.The higher activity (i.e.number of reactant molecules converted per active site) of germanosilicate with modified micro-mesoporous channel system in comparison with parent IWW zeolite in esterification of levulinic acid was attributed to enhanced accessibility of active sites.
其他文献
Reducing the anthropogenic CO2 emissions from fossil resource combustion and human activities has become one of the major challenges we are facing today.Beyond those practical applications for the utilization of CO2,such as the synthesis of salicylic acid
Biobutanol is attracting increasingly interest as a source of renewable energy and biofuels because of its many advantages over bioethanol that include higher energy density,fuel efficiency,and reduced engine damages.Currently,there is a growing interest
NiO nanoparticles with average particles size of 30 nm are synthesized using a one-pot metal-organic framework-combustion (MOF-C) technique,for use as an anode material in rechargeable lithium ion batteries (LIBs).The structural and electronic properties
A novel Ag3PO4-CaO composite photocatalyst with enhanced photocatalytic activity was synthesized and utilized for degradation of ammonia from aqueous solution under sunlight.Ag3PO4 was prepared by precipitation method,and the composite of Ag3PO4-CaO was p
The objective of this work is to study the influences of silica supports and PEG additive on the sorption performance of molecular basket sorbent (MBS) for CO2 capture consisting of polyethylenimine and one of the following supports:SBA-15 (2-D structure)
Polymer electrolyte membrane fuel cells (PEMFCs), as an energy conversion technology, have attracted extensive attention due to their high conversion efficiency, low emission, high energy density,and fast fuel charging [1,2].Pt-based catalysts have been a
The catalytic performance of Cs-substituted phosphomolybdic salts was studied for selective oxidation of isobutane.The results of activity tests revealed that 360 ℃ was the optimal reaction temperature.It was demonstrated that oxidizing sites not only too
Lithium metal is supposed to be critical material for constructing next-generation batteries due to extremely high capacity and ultralow redox potential.However,the perplexing issue of lithium dendrite growth impedes the commercial application.The initial
K-promoted iron/carbon nanotubes composite (i.e.,FeK-OX) was prepared by a redox reaction between carbon nanotubes and K2FeO4 followed by thermal treatments on a purpose as the Fischer-Tropsch catalyst for the direct conversion of syngas to lower olefins.