果蔬食品和土壤中毒鼠强、氟乙酰胺和农药多残留的毛细管气相色谱法快速检测技术研究

来源 :中国卫生检验杂志 | 被引量 : 0次 | 上传用户:jieean
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
目的:建立毛细管气相色谱法同时快速检测果蔬食品和土壤中毒鼠强、氟乙酰胺和8种氨基甲酸酯类农药、2种有机磷农药的多残留分析方法。方法:利用乙腈提取,Florisil固相萃取净化技术,采用DB-17石英毛细管柱(30 m×0.53 mm×0.50μm),NPD检测器气相色谱法测定。结果:12种农药分离效果良好,线性关系好,在青菜、苹果和土壤中的添加平均回收率为77.5%~111.2%,相对标准偏差RSD为2.57%~13.8%,方法最低检出限0.006~0.15 mg/kg。结论:本研究建立的方法简便、快速、经济,具有良好的灵敏度、精密度和准确度,可以满足果蔬食品和土壤中多组分毒物快速检测和突发公共卫生事件应急处理的要求。 OBJECTIVE: To establish a multi-residue analytical method for the simultaneous determination of 2 kinds of organophosphorus pesticides and pesticides in fruit, vegetable and soil by capillary gas chromatography (GC-MS) with strong, fluoroacetamide and 8 carbamate pesticides. Methods: Acetonitrile extraction and Florisil solid-phase extraction (SPE) were performed on a DB-17 quartz capillary column (30 m × 0.53 mm × 0.50 μm) with gas chromatography of NPD detector. Results: The results showed that the separation of 12 pesticides was good and the linear relationship was good. The average recoveries of the pesticides in vegetables, apples and soils ranged from 77.5% to 111.2% with relative standard deviations (RSDs) of 2.57% ~ 13.8%. The detection limits were 0.006 ~ 0.15 mg / kg. Conclusion: The method established in this study is simple, rapid and economical, with good sensitivity, precision and accuracy, which can meet the rapid detection of multi-component toxicants in fruits and vegetables and soil and the emergency treatment of public health emergencies.
其他文献
第一眼看到羊湖,如遇见一个超尘脱俗的少女。她妙曼的蓝色身影在荒凉苍穹和伟岸雪山的映衬下,因幽深蓝得墨黑,与蓝天相映又如青瓷般雅致。这极蓝带着金属的磁性,好似一个蓝色
研究了在硫酸介质中,痕量Fe(Ⅲ)催化高碘酸钾氧化氨氯磷Ⅲ的褪色反应及其动力学条件。本法检测限为8.78×10 ̄(09)g/L,测Fe(Ⅲ)范围0~1.4μg/10mL,采用硫基葡聚糖凝胶分离富集,使本法选择性大大提高,建立了一种高灵敏
用扫描电镜研究CeF3在摩擦过程中的塑性变形吕晋军薛群基欧阳锦林赵家政(中国科学院兰州化学物理研究所固体润滑开放室,兰州730000)国外对CeF3作为1000℃使用的高温固体润滑剂的研究已有报道[1],但对其
Acrylic esters are usually classified into general-purpose varieties and special varieties. The production and application of general-purpose varieties is alre
各级油库在装油时,经常有可能发生冒油事故,特别当使用油泵将油泵入装油罐和油槽时更容易发生。防止冒油事故的发生,一般仍采用比较原始的方法,也就是用人站在罐槽开口处观
介绍用镶套的方法更换锥形穿孔机轧辊辊环,对外表面为锥面的轧辊辊环的过盈联接进行了计算和设计,提出了一种对过盈联结中包容件外表面不是圆柱面时的实用计算方法。 This pap
严格依据化学反应动力学的基本原理,建立了二组分非理想正规溶液的结晶速率表达式。对该系统作了理论分析,得到了系统定态失稳而产生hopf分叉的必要条件是固相的交换能W与RT之比(W/RT)必须大
2000年11月25日-28日,由中山大学港澳珠江三角洲研究中心、香港岭南大学商学研究所、香港亚太21世纪学会和澳门社会科学院联合主办的中华经济协作系统第六届国际研讨会在中
The economic performance of China’s petroleum and chemical industry is comprehensively decided by four major factors now: a. economy grows rapidly, boosting c
本文主要介绍了一种适合于制造减振降噪夹层结构的聚合物阻尼材料。 In this paper, a kind of polymer damping material suitable for manufacturing vibration and noise