Modification of Corrosion Resistance of the Plain Carbon Steels by Pulsed Electric Current

来源 :金属学报(英文版) | 被引量 : 0次 | 上传用户:lpc123456
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The fracture of pipelines caused by corrosion cracks and the resulting oil and gas leakage can lead to great environmental pollution and economic losses.These negative effects are due to serious corrosion of the plain carbon steels used for armor of flexible pipe in oil and gas transmission medium.However,corrosion resistance of carbon steel armors has yet to be improved.In this study,the relationship between corrosion resistance and pearlite fraction in the plain carbon steels has been investigated through the application of pulsed electric current.Based on immersion test and electrochemical measurement,pulsed electric current increases the corrosion resistance of the plain carbon steels by reducing the fraction of pearlite phase.Pitting corrosion,which tends to initiate by galvanic corrosion of ferrite and cementite,is therefore inhibited due to the decrease in pearlite fraction (mixture of ferrite and cementite) under electropulsing.
其他文献
The 7th China-Japan Bilateral Symposium on High Temperature Strength of Materials was held at Dalian, China, during the period August 23-27, 2010.The symposium was co-organized by the High Temperature Strength and Materials Committee, the Society of Mater
期刊
Susceptibility and morphological characteristics of crevice corrosion for SS316,SS904L,SS254sMo and SS2507 in the simulated low-temperature multi-effect distillation environment were investigated by cyclic polarization test,scanning electron microscope an
In this work,the GaN thin films were directly deposited on multilayer graphene (MLG) by plasma-enhanced atomic layer deposition.The deposition was carried out at a low temperature using triethylgallium (TEGa) precursor and Ar/N2/H2 plasma.Chemical propert
Microstructure and mechanical properties of Ni-28W-6Cr alloy-welded joints produced by gas tungsten arc welding were investigated in this work.Results showed that original fine-grain base metal near fusion line totally transformed into coarse heat affecte
Immiscible alloys have aroused considerable interests in the last decades on account of their special physical and mechanical properties and potential applications.A considerable number of researches have been implemented to investigate the solidification
Hot deformation behavior of a high Al-low Si transformation-induced plasticity (TRIP) steel was studied by an MMS-300 thermo-simulation machine at the temperature range of 1050-1200 ℃ and strain rate range of 0.01-10 s-1.The constitutive equations of the
In a fusion reactor,plasma-facing components (PFCs) will suffer severe thermal shock;behavior and performance of PFCs under high heat flux (HHF) loads are of major importance for the long-term stable operation of the reactor.This work investigates the the
The composition and structural evolution of the corrosion product film of two commercial 90Cu-10Ni tubes,namely Tube A and Tube B,after being immersed in natural seawater for 1,3,and 6 months were characterized by scanning electron microscopy,energy-dispe
The effect of thermal aging on phase transformation and impact toughness of an as-cast duplex stainless steel was investigated at room temperature.After long-term thermal aging,the impact toughness decreases significantly and the cracks initiate and propa