【摘 要】
：
The effect of environmental temperature on the damping capacity of Cu-7.66Al-9.52Mn (mass fraction, %) alloy was studied. The result shows that with increasing
【机 构】
：
School of Manufacturing Science and Engineering,School of Mechanical and Electrical Engineering
论文部分内容阅读
The effect of environmental temperature on the damping capacity of Cu-7.66Al-9.52Mn (mass fraction, %) alloy was studied. The result shows that with increasing the environmental temperature, the logarithmic decrement increases firstly and reaches the maximal value of 0.118. The reason is that more phase interfaces and twinning boundaries can move at a higher temperature, leading to higher consumption of energy, in despite of the decreasing of the amount of martensite. When the environmental temperature is above Ms, with further increase in the environmental temperature, the logarithmic decrement decreases sharply mainly because there is little martensite remaining in the alloy.
其他文献
Lutetium aluminum garnet (LuAG) precursors doped with different Pr3+ concentration (0.25at.%, 0.5at.%, 1.0at.%, 3.0at.%, 5.0at.%) were synthesized via a co-prec
Porous TiAl intermetallic compound, as a novel substitute for current inorganic porous material, offsets the shortages of both ceramics and metals. The environm
Using oxalic acid and stoichiometrically mixed solution of NiCl2, CoCl2, and MnCl2 as starting materials, the triple oxalate precursor of nickel, cobalt, and ma
Ag and Cu filled Chevrel phase MxMo6Te8 (x=1.0, 2.0) samples were synthesized by direct solid state reaction and spark plasma sintering. The electrical and ther
The evolution of texture during the annealing and hot rolling process of extruded AZ31 magnesium alloy sheets was studied. There are two kinds of texture compon
The quality of micro heat pipe(MHP) is strongly affected by sealing technology. Based on the analysis of requirements of sealing technology, a cold welding tech
Ba-Al-S-Eu sputtering target for blue emitting phosphors was prepared by powder sintering method. XRD patterns showed that the main components of the target wer
Effect of Co substitution and annealing treatment on the formation, magnetic properties and microstructure of (NdOyTb)12.3(FeZrNbCu)81.7CoxB6(x=0-15) ribbons pr
Microscopical techniques were used to provide the semi-solid microstructure evolutions of ZK60+RE alloys formed by compression and equal channel angular extrusi
A series of Eu(Ⅲ) complexes of α-thenoyltrifluoroacetone(HTTA) with trioctylphosphine oxide(TPPO) and benzoic acid(BA) or its two derivatives, p-toluic acid(P