论文部分内容阅读
[规格:φ3000公厘×3000公厘] 1.清洗及檢查設備另件是否符合設計規格及數量。 2.基礎拉線:根據設計佈置總圖,找出過濾機的基礎中心線,再依基礎中心線,找出马達基礎中心線及地脚螺絲位置,拉一鋼絲,用水平尺檢查是否符合水平,以原有平台基礎找出高度水平線,再以佈置圖距離尺寸找出十字線。一定要符合圖紙上的高、平、直、要求,並提出交檢查人员檢查。 3.合裝濾液槽及支腿:濾液槽一般在運輸時都被折成两塊,必須將两塊濾液槽合裝成一塊。首先將兩塊濾液
[Specifications: φ3000 mm × 3000 mm] 1. Clean and check whether the other parts of the equipment meet the design specifications and quantity. 2. Basis pull line: According to the general layout of the design layout, find the basic filter center line, and then according to the basic center line, find the motor center line and anchor screw location, pull a wire, with a horizontal ruler to check compliance Level, based on the original platform to find a high level of line, and then layout dimensions to find the cross line distance. Be sure to meet the drawings on the high, flat, straight, and submitted to check the inspection staff. 3. Combined filter tank and outrigger: The filter tank is generally folded into two when transported, must be combined into two pieces of the filter tank. First two filtrates