论文部分内容阅读
Hot working steels have been used as die materials for hot extrusion of aluminium. Due to tribological interaction at elevated temperature between the die bearing and the surface of extruded aluminium profiles, not only the surface quality of the extruded product, but also the lifetime of the dies decreases. Deposition of TiBN hard films on the die bearing could improve the die performance. Treatment should be done in a duplex process process combining a plasma nitriding pretreatment (PN) and a plasma assisted chemical vapour deposition (PACVD) of TiBN. In this study the influence of the process conditions on the properties of the duplex coatings was investigated. The relationship between structure and mechanical property was researched. For testing these TIBN hard films under elevated temperature conditions and for comparison with other possible coatings special extrusion dies with different coated bearings were used. The extrusion trials were performed on the 8MN-extrusion press at the research a nd development center for extrusion, Technical University of Berlin.
Hot working steels have been used as die materials for hot extrusion of aluminum. Due to tribological interaction at elevated temperature between the die bearing and the surface of extruded aluminum profiles, not only the surface quality of the extruded product, but also the lifetime of the Deposition of TiBN hard films on the die bearing could improve the die performance. Treatment should be done in a duplex process process combining plasma nitriding pretreatment (PN) and a plasma assisted chemical vapor deposition (PACVD) of TiBN. In this study the influence of the process conditions on the properties of the duplex coatings was investigated. The relationship between structure and mechanical property was researched. For testing these TIBN hard films under elevated temperature conditions and for comparison with other possible coatings special extrusion dies with different coated bearings were used. The extrusion trials were performed on the 8MN-extrusion press at t he research a nd development center for extrusion, Technical University of Berlin.