【摘 要】
：
In part 1 of this two-part series, the formation mechanism of secondary ettringite has been discussed. In this part, the expansive mechanisms of secondary ettri
【机 构】
：
School of Civil Engineering and Architecture
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
In part 1 of this two-part series, the formation mechanism of secondary ettringite has been discussed. In this part, the expansive mechanisms of secondary ettringite due to the ettringite form of sulfate attack were reviewed and analyzed. Three theories have been proposed for explaining the expansive mechanism of secondary ettringite, that is, the crystallization pressure theory (or the crystal growth theory), the theory increasing in solid volume and the swelling theory. According to the analysis, swelling theory should be responsible for the expansion of secondary ettringite. The experimental results also verified that the expansion, subsequent the cracking and spalling of concrete can be caused by the swelling of fine ettringite particles formed at the interface zone of coarse aggregate particles.
其他文献
Extrusion is the key technology to manufacture aluminum profiles and involves complicate metal deformation coupled with temperature changes. The choice of numer
The effect of evolution of polycrystalline texture on normal anisotropy coefficient r-value of aluminum alloy sheet was investigated. For this purpose, the text
The fly ash was added to melt to increase the melt viscosity. The main components are quartz and mullite in the fly ash,therefore its a kind of hardness ceramic
The semi-solid slurry of A356 Al alloy was manufactured by low superheat pouring and weak electromagnetic stirring. The effects of pouring temperature on the sl
ZnSe∶Mn nanocrystals were grown by chemical vapour transport method using the matrix of SiO2 aerogels. The cubic structure of the nanocrystals was confirmed by
This study is to reveal the effect of interlayer lattice registry on the formation of collapsed double wall carbon nanotubes (DWCNTs). It is found that collapse
Nano SiO2 was filled into gypsum particleboard. Effect of the amount of nano SiO2 particles filled,ultrasonic dissipating duration and treating the nano particl
The electron structure of γ/α2 phase boundaries in lamellar colonies in Ti-47Al-2M(M=Nb, Cr, V) (mole fraction, %) alloys was theoretically investigated by Em
The effect of wheel speed on microstructures of Ti-48%Ni (mole fraction) melt-spun ribbons was investigated by X-ray diffractometry,scanning electron microscopy
The microstructure and mechanical properties of AZ31 Mg alloy processed by high ratio extrusion (HRE) were investigated. General extrusion with extrusion ratio