论文部分内容阅读
报导我们研制的一套光子扫描隧道显微镜（ＰＳＴＭ）和扫描隧道显微镜（ＳＴＭ）联用系统的初步实验结果。联用系统采用的基本结构为早先研制的一台ＰＳＴＭ，另外增加了一个ＳＴＭ通道，通过真空蒸镀金膜制作了既导电又导光的光纤探针，联用系统用ＳＴＭ通道隧道电流反馈控制探针高度。初步实验结果表明，ＰＳＴＭ和ＳＴＭ通道既能分别单独成像，亦能用导电导光探针实现ＰＳＴＭ和ＳＴＭ同时成像。
The preliminary experimental results of a set of photonic scanning tunneling microscope (PSTM) and scanning tunneling microscope (STM) system were reported. The basic structure used in the combined system is a PSTM developed earlier. In addition, an STM channel is added, and a conductive and light-guiding optical fiber probe is produced by vacuum evaporation of the gold film. The system uses STM tunneling current feedback control Needle height. Preliminary experimental results show that the PSTM and STM channels can not only separately imaging, but also the conductive light guide probe PSTM and STM simultaneous imaging.