High-temperature oxidation behavior of Nb67-xW15Si18Hfx(x=0, 5 and 10) alloys

来源 :中国有色金属学会会刊(英文版) | 被引量 : 0次 | 上传用户:huaiwanshi163
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The oxidation behaviors of Nb67-xW15Si18Hfx (x=0, 5, 10) alloys were studied at 1 250 ℃ in air. It is found that the Nb67W15Si18 alloy has the best oxidation resistance among the three alloys; and Hf addition is harmful to the oxidation resistance of the Nb67W15Si18 alloy. The oxides formed on the Nb67W15Si18 alloy are mainly Nb12WO33 and NbO2, and that on the Nb62W15Si18Hf5 and Nb57W15Si18Hf10 alloys is Nb2O5. Effect of Hf on the oxidation behavior of the Nb67-xW15Si18Hfx alloys has been discussed based on microstructures and kinetics of oxidation.
其他文献
The decomposed process of bastnaesite, monazite and mixed rare earth concentrate in CaO-CaCl-CaCl2 was studied by means of TG-DTA method. The relationship among
Based on a novel high strength Al-Cu-Li-X alloy-2A97, the effect of T6I6 and its modified processes on the properties investigated by SEM and tensile test. The
Single phase chromium-substituted orthorhombic LiMn1-xCrxO2 (0≤x≤0.05) were successfully synthesized by hydrothermal treatment of Mn2O3, Cr2O3 and lithium hyd
The effect of rectangle wave pulse current on solidification structure of ZA27 alloy was studied.The results show that the wave pattern relies on the frequency
The Al-based alloy with equiaxed grains was directly produced in the industrial aluminum electrolyzer. The varieties of grain features and grain sizes vs the re
The electrical properties of La0.6Sr0.4Co1-yFeyO3 (LSCF, y=0-1.0) cathode materials were measured by DC four probes, X-ray photo-electron spectrum (XPS) was als
Golden yellow cerium conversion film was obtained on magnesium alloys surface by immersion method and the preparation parameters were established. The influence
Growth of SiCGe ternary alloy on 6H-SiC in a conventional hot-wall CVD system was initially studied. SiH4, GeH4 and C3H8 were employed as silicon, germanium and
A new method of studying the corrosion inhibition mechanism of rare earth metal(REM) on LC4 Al alloy with the spilt cell technique was studied. The principle an
During cold ring rolling process,changing the sizes of forming rolls including driver roll and idle roll will lead to a change of amount of feed △h and contact