论文部分内容阅读
新生Tsap2000型拌和站在历经6年的使用后,有一套加热滚筒驱动装置损坏,减速箱内齿轮打齿,轴承损坏,密封失效,齿轮轴从减速箱掉出。要重新生产就需要更换减速箱或修复原减速箱。单修减速箱不是最经济可行的办法。最主要的是时间,沥青路面施工中耽搁一天就是数万元的损失, 要修好一台减速箱最少要4天时间, 无形中损失数十万元。同样,购买减速箱也要考虑时间和费用的问题。总之,修和买都不合适,只有考虑改装。新型号的沥青拌和站尤其是国
After six years of use, the new Tsap2000 mixing plant has a set of heated roller drive damaged, the gear in the gearbox is broken, the bearing is damaged, the seal fails and the gear shaft falls out of the gearbox. To be re-production will need to replace the gearbox or repair the original gearbox. Single repair gearbox is not the most economical and feasible way. The main thing is the time, the delay of asphalt pavement construction is tens of thousands of yuan of losses, to repair a gearbox at least 4 days, virtually loss of hundreds of thousands of dollars. Similarly, the purchase of gear box also have to consider the issue of time and cost. In short, repair and buy are not suitable, only consider refitting. New models of asphalt mixing station, especially the country