论文部分内容阅读
拉拔钢丝时的冷却方式有三种:拉丝模冷却、卷筒冷却和钢丝直接冷却。拉丝模冷却是水通过拉丝模盒的间接冷却或水同拉丝模外表面直接接触冷却,而钢丝不与冷却水接触。研究表明,冷却拉丝模所散发的热量不超过钢丝产生热量的4%。卷筒冷却是指卷筒内的水冷和外部的风冷。内部用流动水冷却效果较好。强迫循环冷却系统装有几只喷水管,使喷水流经卷筒内表面,导热系数较高。但对冷却水的洁净度及卷筒内壁的防
There are three ways of cooling when drawing a wire: cooling of the drawing die, cooling of the drum, and direct cooling of the wire. Drawing die cooling is water through the drawing box indirect cooling or water contact with the outer surface of the drawing die direct cooling, and the wire is not in contact with the cooling water. Research shows that the cooling wire drawing die heat does not exceed 4% of the heat generated by the wire. Coil cooling refers to the water cooling inside the drum and external air cooling. Internal mobile water cooling effect is better. Forced circulation cooling system equipped with a few spouts, so that water flows through the drum inner surface, high thermal conductivity. However, the cleanliness of the cooling water and anti-roll wall