【摘 要】
：
In order to optimize the sintering process, a real-time operation guide system with artificial intelligence was developed, mainly including the data acquisition
论文部分内容阅读
In order to optimize the sintering process, a real-time operation guide system with artificial intelligence was developed, mainly including the data acquisition online subsystem, the sinter chemical composition controller, the sintering process state controller, and the abnormal conditions diagnosis subsystem. Knowledge base of the sintering process controlling was constructed, and inference engine of the system was established. Sinter chemical compositions were controlled by the strategies of self-adaptive prediction, internal optimization and center on basicity. And the state of sintering was stabilized centering on permeability. In order to meet the needs of process change and make the system clear, the system has learning ability and explanation function. The software of the system was developed in Visual C++ programming language. The application of the system shows that the hitting accuracy of sinter compositions and burning through point prediction are more than 85%; the first-grade rate of sinter chemical composition, stability rate of burning through point and stability rate of sintering process are increased by 3%, 9% and 4%, respectively.
其他文献
实验分别对慈竹及龙须草进行了低污染制浆探讨。结果表明,慈竹制浆比较理想的工艺条件为NaOH用量20%(NaOH计),Na2SO3用量3%(NaOH计),试验室自制无硫助剂用量0.1%,液比1︰3;龙须
MoSx coatings were prepared by bipolar-pulse DC unbalanced magnetron-sputtering system with the variation of coating thickness at different Ar pressures. The co
The corrosion resistance of 2024 Al and SiC particle reinforced 2024 Al metal matrix composite (SiCp/2024Al MMC)in 3.5% NaCl solution was investigated with elec
The three dimensional solidification simulation of the single crystal investment castings at withdrawal rates of 2 mm/min, 4.5 mm/min and 7 mm/min was performed
Compression creep tests of a Ti-48%Al (mole fraction) alloy were carried out at 1150K with soft-orientated PST crystal. Parallel twinning took placed uring the
The problem of adaptive generalized predictive control which consists of output prediction errors for a class of switched systems is studied. The switching law
An investigation of the characteristics of flowrate transients within slug flow was conducted in a largescale outdoor testing facility. The test section consist
The dephosphorization experiments of low phosphorus containing steel by CaO-based and BaO-based fluxes were carried out. The effects of the oxygen potential in
Mixed Al-Si and Al-Si-SiC powders were employed as insert layers to reactive diffusion bond SiCp/6063 MMC (metal matrix composites). The results show that SiCp/
根据建设工程风险的特点,论述已被广泛应用的非保险转移这一风险对策.