论文部分内容阅读
某住宅区几栋家属楼,均为6层4单元,阳台联门窗采用的是同一型号。加工订货到了现场,才发现都是同一个开启方向。用工人的话说,都是“顺撇子”;而实际上应有2/3为“对脸儿”的,结果错订了700多樘。造成的原因:一是图纸没注“开启方向对称”等字句;二是新预算员现场施工经验不足,加工订货单上当然也未注明开启方向;三是,图纸会审时,三方都忽略了这个问题。各部门、各专业,如技术、施工、预算、水、暖、电的工作性质不同,看图纸的角度各异。技术、施工人员看图纸,注重结构,尤其是墙身、框架结构等骨架的交圈问题。即工人常说的:“各张图纸都要说得上话”。意思是尺寸、
Several residential buildings in a residential area are 6-storey and 4-unit units, and the same type is used for the balcony joint doors and windows. When processing orders arrived at the scene, they discovered that they were all in the same direction. In the words of the workers, they are all “sweeping sons”; actually, two-thirds of them should be “face-to-face,” resulting in more than 700 mistakes. Causes: First, the drawings did not note the words “opening direction symmetry”, etc.; second, the new budgetist had insufficient on-site construction experience; of course, the processing orders did not indicate the opening direction; Third, when the drawings were reviewed, the three parties ignored the drawings. this problem. Various departments and professions, such as technology, construction, budget, water, heating, and electricity, have different work natures, and they look at different drawings. The technical and construction personnel look at the drawings and pay attention to the structure, especially the crossover of the skeletons such as the wall body and the frame structure. That is, workers often say: “Each sheet must be plausible.” It means size,