论文部分内容阅读
家里装修后留下几段大大小小的 PVC 塑料管,放着用不上,丢掉又可惜。近日突发奇想,拿它做花盆不是很好吗?我找来一段5寸的 PVC 塑料管,先根据需要的长度将管子割下,再把两端管口锯齐、锉光。接下来用什么做“底”呢?可以作“底”的材料很多,如包装用的泡沫、塑料扣板、铝塑板的边角料,只要不易腐烂即可。将底板裁成和管子内径一样大小,中间开几个排水孔,用504胶水粘上就行了(操作方法见图1)。如果下面垫一
After the renovation of the home left a few paragraphs large and small PVC plastic pipe, put do not have, lost and regrettable. Suddenly whim, took it to do the pot is not very good? I find a 5-inch PVC plastic pipe, the first length of the pipe according to the need to cut, then both ends of the nozzle saw Qi, rasping light. What to do next “bottom”? Can be used as “the end” of many materials, such as packaging foam, plastic buckle, aluminum scrap trim, as long as the perishable can. Cut the bottom plate the same size as the diameter of the tube, open a few drainage holes in the middle, with 504 glue stick on the line (operation method shown in Figure 1). If the pad below one