论文部分内容阅读
我是第一个进入卓里机械厂的技术人员,8年来又陆续来了6名技术人员,总的来说我们的水平都不太高,要和兄弟厂的技术人员相比,不论是在质量上还是数量上,那真是天地之差。那为什么又能够适应生产发展的需要?我认为在我们技术工作中有以下两个特点: 一是,机构简单,办事效率高。我们技术人员少,不可能分工很细,更不可象大厂那样分设计、工艺、工具、设备等科,而是一个人要管很多的事,虽然工作都很繁忙,但是办事的效率还是很高的,主要是中间环节少,一竿子插到底,研究定了的事,一旦分给谁,谁出图,谁服务,出现问题就在现场解决。所以,不管产品设计、工艺设计都来得快。如7Y—750型三轮农用运输车,从绘制图纸到产品鉴定只用了三个来月。7Y—975型自卸三轮车从出样机到投入小批生产只有一个月,1994年12月出样机,1995年就生产了两千多辆,在市场上很受农民欢迎。工艺工装也是同样,总的来说体现了一个快字。如果要按部就班、按图索骥地去工作,那
I was the first technician to enter the Zhuoli Machinery Plant. In the past eight years, I have come to a total of six technicians. Generally speaking, our level is not too high. We must compare with the technical staff of the brother factory, whether it is Quality or quantity, that is really the difference between heaven and earth. Then why can we adapt to the needs of production development? I think there are two characteristics in our technical work: First, the organization is simple and the work efficiency is high. Our technical staff is small, it is impossible to divide the work very finely, and it is even more difficult to divide the design, crafts, tools, equipment, etc. as the big factories, but it is a person who has to manage many things. Although the work is very busy, the efficiency of the work is still very high. The main thing is that there are few intermediate links, and if you pass it on to the end, what will be studied and settled will be resolved on the spot once you give it to whoever plans it and who will serve it. So, regardless of product design, process design come quickly. For example, the 7Y-750 three-wheeled agricultural vehicle used only three months from drawing drawings to product identification. The 7Y-975 dump tricycle only took one month from the sample ejector to put into small batch production. In December 1994, it exported prototypes. In 1995, it produced more than 2,000 vehicles. It was very popular among farmers in the market. Process tooling is also the same, in general, reflects a fast word. If you want to go step by step and follow the map to work, then