【摘 要】
：
A novel visible light active photo-catalyst named CHC/C-PVA/TiO2,the composite of titanium dioxide (TiO2) with conjugated derivative of polyvinyl alcohol (C-PVA) loaded on a cordierite honeycomb ceramic (CHC) substrate,was fabricated by combining the synt
【机 构】
：
State Key Laboratory of Polymer Materials Engineering of China, Polymer Research Institute of Sichua
论文部分内容阅读
A novel visible light active photo-catalyst named CHC/C-PVA/TiO2,the composite of titanium dioxide (TiO2) with conjugated derivative of polyvinyl alcohol (C-PVA) loaded on a cordierite honeycomb ceramic (CHC) substrate,was fabricated by combining the synthesis of TiO2 sol,preparation of C-PVA via thermally treating polyvinyl alcohol,and immobilization of TiO2 sol and C-PVA on CHC.By detecting the change of UV-vis absorption spectra of the model organic pollutant (methyl orange (MO)) in the presence of the composite under visible light irradiation,the photo-catalytic activity was evaluated and the results show that the CHC/C-PVA/TiO2composite has an enhanced photo-catalytic activity when compared to the CHC/TiO2 composite.Besides,the CHC/C-PVA/TiO2 shows a good photo-catalytic stability after the fourth cycles.The structure analyses by scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS) show the coexistence of C-PVA and TiO2 on the CHC and the cracks on the surface of CHC/C-PVA/TiO2.Result of ultraviolet-visible diffuse reflection spectroscopy (UV-vis DRS) reveals that the CHC/C-PVA/TiO2 can absorb both ultraviolet and visible light while result of X-ray photoelectron spectroscopy (XPS) indicates the existence of C,O and Ti elements in the CHC/C-PVA/TiO2.The typical structures as well as the optical characteristics of the CHC/C-PVA/TiO2 are responsible for the enhancement in the photo-catalytic activity.
其他文献
The Ni2P/MgAlO catalysts with different MgO/Al2O3 ratios were prepared by the phosphidation of corresponding Ni/MgAlO catalysts with triphenylphosphine in liquid phase.It was found that the MgO/Al2O3 ratio affected the Ni2P/MgAlO catalysts significantly.T
CO2 capture with ionic liquids (ILs) has attracted many attentions,and most works focused on absorption ability at ambient temperatures,while seldom research was concerned at elevated temperatures.This not only limits the CO2 absorption application at ele
Highly porous nitrogen-doped carbon materials were synthesized by the carbonization of a low-cost porous covalent triazine polymer,PCTP-3,which had been synthesized by the AlCl3 catalyzed FriedelCrafts reaction of readily available monomers.The nature of
Elevated-temperature pressure swing adsorption is a promising technique for producing high purity hydrogen and controlling greenhouse gas emissions.Thermodynamic analysis indicated that the CO in H2-rich gas could be controlled to trace levels of below 10
Different oxygen and nitrogen containing functional groups were created on the surface of the multiwalled carbon nanotubes.The multi-walled carbon nanotubes were treated in ultrasonic bath with sulfuric or nitric acid.Furthermore the surface texture was m
The effect of annealing of Ti foils before anodization on the morphology and electrochemical performance of resultant nanoporous anatase TiO2 (np-TiO2) as anode in rechargeable lithium-ion batteries (LIBs) was investigated.The np-TiO2 anode fabricated fro
The Alkaline Thermal Treatment (ATr) of biomass is one of the few biomass conversion processes that has a potential for BECCS (bio-energy with carbon capture and storage).Combining in-situ carbon capture with H2 production creates a carbon-neutral process
In this paper,we report photoelectrochemical (PEC) conversion of carbon dioxide (CO2) using photocathodes based on Cu2O nanowires (NWs) overcoated with Cu+-incorporated crystalline TiO2 (TiO2-Cu+) shell.Cu2O NW photocathodes show remanent photocurrent of
Porous carbon spheres are prepared by direct carbonization of potassium salt of resorcinol-formaldehyde resin spheres,and are investigated as CO2 adsorbents.It is found that the prepared carbon materials still maintain the typical spherical shapes after t
Chemical looping dry reforming (CLDR) is an innovative technology for CO2 utilization using the chemical looping principle.The CLDR process consists of three stages,i.e.CH4 reduction,CO2 reforming,and air oxidation.Spinel nickel ferrite (NiFe2O4) was prep