• 不 限
  • 期刊论文
  • 硕博论文
  • 会议论文
  • 报 纸
  • 英文论文
  2. 您的位置
  3. 首页
  4. 期刊论文
  5. Microstructure characterization and hardness of Al-Cu-Mn eutectic alloy

Microstructure characterization and hardness of Al-Cu-Mn eutectic alloy

来源 :中国铸造：英文版 | 被引量 : 0次 | 上传用户：oceanspring
【摘 要】
：
The composition of Al-Cu-Mn ternary eutectic alloy was chosen to be Al-32.5wt.%Cu-0.6wt.%Mn to theAI2Cu and Al12CuMn2 solid phases within an aluminum matrix （a-A
【作 者】
：
Yusuf Kayglslz 
【机 构】
：
DepartmentofElectricity
【出 处】
：
中国铸造：英文版
【发表日期】
：
2018年5期
【关键词】
：
directional SOLIDIFICATION ALUMINUM ALLOYS MICROSTRUCTURE HARDNESS test directio 
下载到本地 , 更方便阅读
下载此文 赞助VIP
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
The composition of Al-Cu-Mn ternary eutectic alloy was chosen to be Al-32.5wt.%Cu-0.6wt.%Mn to theAI2Cu and Al12CuMn2 solid phases within an aluminum matrix （a-AI） from its melt. The AI-32.5wt.%Cu-0.6wt.%Mnalloy was directionally solidified at a constant
其他文献
Effect of centrifugal counter-gravity casting on solidification microstructure and mechanical proper
To investigate the influence of Centrifugal Counter-gravity Casting(C3) process on the solidification microstructure and mechanical properties of the casting, A
期刊
Influence of MTi3C0.15 modification treatment on damping properties of ZnAII0 alloy
Zn-AI alloys constitute an interesting group of foundry alloys. Due to a relatively low meltingtemperature, they allow a decrease in energy-consumption of the m
期刊
MODIFICATIONDAMPINGDAMPINGCOEFFICIENTZINCALLOYSZnAIIOULTRASOUNDwavemodi
Modii cation ef ect of calcium-magnesia phosphate fertilizer on microstructure and mechanical proper
In order to modify in-situ synthesized Mg2Si particles in Mg2Si/Mg-4Si composite, the modif ication effect of calcium-magnesia phosphate fertilizer on primary M
期刊
hotcrackCOMPOSITEcalcium-magnesiaphosphatefertilizermodificationMG2SIfer
Investigation on synthesis of a low cost no-bake furan resin system with a high strength
The synthesis of a low cost no-bake furan resin with a high strength was researched in this paper. Through the analysis of main factors influencing the strength
期刊
Effect of SiC particle addition on microstructure of Mg2Si/AI composite
In the present study, by adding SiC particles into Al-Si-Mg melt, Mg2Si and SiC particles hybrid reinforced Al matrix composites were fabricated through the Mg2
期刊
Effect of heat treatment on structure and magnetic properties of Fe65.5Cr4Mo4Ga4P12C5B5.5 bulk amorp
这研究处理 Fe <sub>65.5</sub > Cr <sub>4</sub > 瞬间 <sub>4</sub > Ga <sub>4</sub > P <sub>12</sub > C <sub>5</sub > B <sub>5.5</sub> 铁磁性的体积非结晶的合金。
期刊
体积金属性的玻璃X光检查衍射分析微分热分析热磁性质磁化坚硬微观结构bulk metallic glass X-ray diffraction a
Effects of Ce addition on microstructure, mechanical properties and corrosion resistance of as-cast
In this study, Ce was introduced into the AZ80 alloy and the effects of Ce addition on the microstructure, mechanical properties and corrosion resistance of the
期刊
A high-Nb TiAl alloy with highly refined microstructure and excellent mechanical properties fabricat
In the present research, microstructure refinement of a high-Nb TiAl alloy(Ti-48Al-8Nb-0.15B) was realized by means of the electromagnetic continuous casting(EM
期刊
"One Belt One Road" facilitates foundry development of Southeast Asia - FICMES visits VFMS
Foundry Institution of Chinese Mechanical Engineering Society (FICMES) made a special trip to Hanoi, Vietnam, on April 23, 2019, to visit Vietnam Foundry and Me
期刊
FICMESVFMSTASEMINAR
Effects of P＋Cr complex modification and solidification conditions on microstmcture of hypereutectic
Large and segregated primary Si particles may drastically decrease the mechanical properties of Al-Si alloys. To solve this problem, a P-Cr complex modif ier wa
期刊