论文部分内容阅读
从保持架设计和生产工艺入手 ,分析了 6 8813斜盘轴承存在旋转阻滞的原因 ,主要是保持架兜孔深度加工误差和保持架镀银层厚度影响所至。上述问题可采用将兜孔底角适当增大的方法解决。附图 2幅 ,表 2个
Starting from the cage design and production process, the reasons for the rotation blockage of the 6,883 swash plate bearing are analyzed, mainly due to the machining error of the pocket depth of the cage and the thickness of the silvered layer of the cage. The above problems can be used to increase the pocket bottom angle method to solve. Figure 2, Table 2