变频器在烟气脱硫技术中的应用

来源 :变频器世界 | 被引量 : 0次 | 上传用户:chensiyao159
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
随着社会的不断发展,工业生产和人民生活对能源的需求量越来越大,依赖性也越来越强。煤炭作为我国主要能源,它燃烧产生的烟气中含有大量SO_2气体,对大气的污染十分严重,因此减少燃煤烟气中SO_2的排放量,解决酸雨污染,创造一个清洁、健康的生存和工作环境,已成为我国政府和人民关心的重要问题之一。本文从烟气脱硫的工艺流程分析,提出了以PLC为控制核心,采用芬兰Vacon变频器进行变频控制的设计方案。实践证明,该系统具有运行稳定、操作简单、节约能源、脱硫效率高等许多优点,具有明显的经济效益和社会效益。 With the continuous development of society, the demand for energy in industrial production and people’s life is more and more dependent and more and more dependent. As the main energy source in our country, coal-fired flue gas contains a large amount of SO 2 gas and is very polluting to the atmosphere, thus reducing SO 2 emissions from coal-fired flue gas, solving acid rain pollution and creating a clean and healthy life and work The environment has become one of the important issues of concern to our government and people. This article from the flue gas desulfurization process analysis, put forward the PLC as the core of the control, the use of Finland Vacon inverter frequency control design. Practice has proved that the system has many advantages of stable operation, simple operation, energy conservation, high desulfurization efficiency, with obvious economic and social benefits.
其他文献
下列三篇文章原载于2001年第12期《The Hong KongAccountant》,原文标题分别为“The Importance of Being Independent”、“Accountants’ Independence: A Cornerstone of
A new thin film pulse transformer for using in ISND and model systems is fabricated by a mask sputtering process. This novel pulse transformer consists of four
本刊讯 (通讯员庄希贵)我国古籍整理特别资助项目《中国水书》已进入最后制作阶段,将于今年10月由四川出版集团旗下的巴蜀书社和四川民族出版社联合隆重推出。《中国水书》是
最新一期《瞭望周刊》一篇关于30年来中国行业收入差距变迁的文章引起了公众的热议。文章用2006年劳动和社会保障部的统计数据说明目前行业收入差距的现状:电力、电信、金融
冲天炉作为铸铁厂或车间普遍采用的熔炼设备,已有相当悠久的历史了。为了适应新的使用要求,冲天炉的结构近年来得到了多次的改进,并经常进行改炉节焦的活动,但冲天炉由于受
【问】:怎样目测箱式电炉的炉温? 【答】:钢件的加热和冷却是热处理操作的两个基本过程。因此,热处理时的加热温度在很大程度上决定着热处理后的质量。显然,准确地控制 [Q]
据报导,英国标准学会颁布了硬质合金刀具新标准BS4193,该标准对早先颁布的标准(标准号同)在有关不重磨刀片的尺寸方面作了修订。第一部分“转位式(不重磨式)硬质合金刀片的
目的探讨桥本氏脑病(Hashimoto encephalopathy,HE)的临床特点及诊断。方法回顾性分析2006年1月—2014年1月6例HE患者的临床资料。结果本组男性1例,女性5例,年龄25~66岁,其中
在制造电厂制粉系统伸缩节时,要剪切大量圆弧形板料,材质A3,板厚2mm,在自制圆盘剪床上剪切。以前剪刀片是用T7工具钢制造的,经淬火——低温回火处理,硬度HRC50,剪切直料时使
在机械维修中,经常从机体上拆卸衬套和轴承,每当遇到必须由它的装入方向退出时,这往往是比较困难的。 In mechanical repair, it is often more difficult to disassemble