论文部分内容阅读
铝合金门窗具有新颖独特的艺术风格。在建筑物中,它颜色清晰明亮,光彩夺目,清雅别致。这种新型的建筑材料的施工技术尚未编入土建工程的施工预算定额。1984年我们在某工程中采用了铝合金门窗,本文介绍施工中的一些体会,供参考。铝合金门窗本件不能焊接,不能锤击。这就要求在施工准备、安装、检查校正、防护清洗等方面有良好的措施。 1.施工准备:铝合金门窗一般在专业工厂制作加工,成箱运至工地,在施工现场进行组合安装。由于铝合金型材碰撞后易变形,所以对组装件要注意保护。为防止组装时碰撞变形,宜在组装场地上铺二层草垫。一个单位工程,铝合金门窗的大小构配件达千余种,因此要对号开箱,按号堆放,对号组装,施工要有条不紊。安装前要检查洞口尺寸与窗框四周空隙是否足
Aluminum alloy doors and windows have a novel and unique artistic style. In the building, it is bright and bright, dazzling, elegant and chic. The construction technology of this new building material has not been incorporated into the construction budget of the civil engineering project. In 1984 we used aluminum alloy doors and windows in a project. This article describes some of the construction experience for reference. Aluminum alloy doors and windows can not be welded and cannot be hammered. This requires good measures in terms of construction preparation, installation, inspection and calibration, and protection and cleaning. 1. Construction preparation: Aluminium alloy doors and windows are usually produced and processed in a professional factory, transported in boxes, to the construction site, and assembled at the construction site. Since aluminum alloy profiles are easily deformed after collision, care must be taken to protect the assembly. To prevent collision during assembly, it is advisable to lay two layers of mats on the assembly site. A unit project, aluminum alloy doors and windows of the size of the components and components of more than a thousand species, it is necessary to open the box number, according to the number of stacked, the number of assembly, construction must be orderly. Before installation, check whether the size of the opening and the gap around the window frame are sufficient