论文部分内容阅读
美国航天局已建议把光纤用于空间站的数据处理或控制。每种应用都有其独特的要求。和信息传输的一般领域不同,用于控制时,除相对适中的速度外,还要求超高的可靠性;相反,用于数据处理时,除要求相对于控制应用来说中等的可靠性外,还要求超高的速率。在空间站中,对传感器信息的数据处理,需要特殊的设备,并特别需要宽带宽的光纤来快速传输数据。对速率适中的仪器的信号处理采用通用的信息处理机就可以了。这些机器连同光纤数据线路能处理高达1200Mb/s的数据。然而,当传输的数据速率和复杂性增加时,必须开发能处理超过1200Mb/s数据速率
NASA has proposed the use of optical fiber for data processing or control of space stations. Each application has its own unique requirements. In contrast to the general field of information transmission, for control, in addition to relatively modest speeds, ultra-high reliability is also required; on the contrary, when used for data processing, in addition to requiring medium reliability with respect to control applications, Also require ultra-high speed. In space stations, data processing of sensor information requires special equipment and, in particular, requires wide bandwidth optical fibers for fast data transfer. Signal processing of moderate-speed instruments uses a common information processor. These machines, along with fiber optic data lines, can handle up to 1200Mb / s of data. However, as the data rate and complexity of the transmission increase, it is necessary to develop data rates of over 1200 Mb / s