论文部分内容阅读
前语在国内有许多废铜回收,回收后需要熔化再造,而铜线上引系统是熔铜设备后端工艺,将熔化的铜水冷却成型上拉牵引,按照设定的外径制作成不同外径的铜杆,之后再根据不同工艺拉丝成更细的铜线,随着线缆行业发展,对铜材质量要求越来越高,对上引成铜杆的要求也越来越高。由于上引系统前段熔铜设备一直需要加热,非常耗电,如果在同样耗电情况下能够加快和改善铜线质量和产量,能够产生良好经济效益。过去上引机控制系统:
Preface There are many scrap copper recycling in the country, the need for recycling after melting, and copper on the lead system is molten copper equipment back-end technology, the molten copper cooling forming pull traction, in accordance with the set diameter made different Outer diameter of the copper rod, and then draw according to different processes into finer copper wire, with the cable industry, the higher and higher requirements of the quality of copper, the lead on the demand for copper rod is also getting higher and higher. Due to the system cited above melting copper equipment has been the need for heating, very power consumption, if the same power consumption can speed up and improve the quality and output of copper, can produce good economic returns. In the past on the machine control system: