论文部分内容阅读
采用高压水除锈工艺,效果显著,与人工除锈相比,效率可提高30倍以上。但我厂高压水除锈器调试开始阶段,曾出现象梳状样的漏喷现象。为消除这一现象,提高除锈质量,经过调试、分析,我们摸索出了消除这一现象的方法,兹介绍如下。两种除锈器的工作原理1.往复式除锈器工作原理往复式除锈器工作原理如图1所示。电动机经轴端皮带轮作第一级减速传动后,通过链
The use of high-pressure water rust process, the effect is significant, compared with artificial derusting, the efficiency can be increased by 30 times. However, I plant high-pressure water descaling start debugging phase, there have been comb-like leakage phenomenon. In order to eliminate this phenomenon and improve the quality of rust removal, after debugging and analysis, we found out ways to eliminate this phenomenon. The working principle of two kinds of descaling 1. Reciprocating type descaling works The reciprocating descaling works as shown in Figure 1. After the end of the motor shaft pulley for the first stage deceleration drive through the chain