论文部分内容阅读
一、通讯室注意事項1.通讯室的位置,应当建筑在不受振动的地方。在水力發电厂的基地下面,多半是水压管,常常受着水力的冲击而使地面振动。由于通訊的机器銲头数以千計,每个銲头不像电銲那样牢靠,都是鉛銲,長期振动的結果,就有脱銲的危險。机器越旧,銲头断的越多,即使是我們装的新机,也經常發生断銲事件。通讯出事故,会影响調度的联系,从而也会影响送电的安全。同时,新装的机器晶体很多,也是怕振动的。所以我建议通訊室应当设计在靜肃的地方,最好不要设计在水压管上面。
First, the communication room precautions 1. The location of the communication room should be built in a place free from vibration. Under the base of the hydroelectric plant, most of them are hydraulic pipes, often subject to vibrations of the ground to vibrate the ground. Due to the thousands of welding heads of the communication machines, each welding head is not as reliable as welding, which is the result of lead welding and long-term vibration. Therefore, there is a danger of welding off. The older the machine, the more broken the welding head, even the new machine we installed, but also often happen welding event. Communication accident, will affect the scheduling of the contact, which will also affect the safety of power transmission. At the same time, the new machine a lot of crystal, but also afraid of vibration. So I suggest that the communication room should be designed in a quiet place, it is best not to design in the hydraulic pipe above.