论文部分内容阅读
现有除雪机的主要缺点是功能单一。虽然有的除雪机除雪效果好,但却不能适应复杂路况,机构易损坏;有的除雪机能清除浮雪,但不能清除压实雪。本文介绍一种破冰除雪装置专利。1 结构与工作原理 专利提出的破冰除雪装置（专利号92237118.0）是一个箱式铸钢结构（图1）。它集机、电、液于一体,由破碎冰雪（4kW）和输送清扫（3kW）两部分组成。工作前需根据当日积雪厚度调整铲头、刮板和清扫刷的深度,启动发动机后即带动电机旋转。破碎部分电机带动箱体的凸轮转动,凸轮再带动穿越箱体底部导孔的铲头作往复运动,铲剁破碎冰雪。同时,悬挂于箱体后部的刮板和清扫刷在另一电机带动下将破碎的冰雪连同浮雪一起输送到道路右侧,清扫刷将道路清扫干净。
The main drawback of the existing snow blower is the single function. Although some snowplow removal effect is good, but it can not adapt to complex road conditions, institutions vulnerable; some snowplow removal of snow, but can not remove the compaction of snow. This article describes a patented ice breaking snow removal device. 1 Structure and working principle The proposed ice-breaking snow removing device (Patent No. 92237118.0) is a box cast steel structure (Figure 1). It combines machine, electricity and liquid into one, which is composed of broken ice and snow (4kW) and conveying and cleaning (3kW). Before work, adjust the depth of shovel head, scraper and cleaning brush according to the thickness of snow on the day before starting the motor to drive the motor to rotate. Broken part of the motor driven cabinet box cam rotation, cam and then led through the bottom of the box guide hole shovel reciprocating motion, shovel chopped snow and ice. At the same time, the scraper and cleaning brush hanging on the rear of the box will drive the broken ice and snow together with the snow to the right side of the road, and the brush will clean the road.