论文部分内容阅读
架空索道采用多槽摩擦轮驱动机时,各个绳槽的磨损不均匀,导致牵引钢绳在驱动轮上滑动,从而加剧钢绳和绳槽的磨损,特别是使用塑一弹性衬垫的驱动轮,其磨损现象尤为突出。由于磨损不均而引起绳槽直径 不等,因此需要用固定在机架上的刀具经常车削绳槽,才能使各绳槽直径趋于一致。 为了克服上述缺陷,全苏机械化设计院研究并推广了一种新型驱动机,参见下图。
When the multi-slot friction wheel drive mechanism is used for the overhead cableway, the wear of each rope groove is uneven, causing the traction rope to slide on the driving wheel, thereby aggravating the wear of the steel rope and the rope groove. In particular, the use of an elastic pad-shaped driving wheel , Its wear phenomenon is particularly prominent. Due to uneven wear and tear caused by different rope groove diameter, so you need to use a fixed tool in the rack cutter carved rope groove, rope groove in order to make the same diameter. In order to overcome these shortcomings, Quanzhou Institute of mechanized design to study and promote a new type of drive, see below.