【摘 要】
：
Li metal has been regarded as one of the most promising anodes for high-energy-density storage systems due to its high theoretical capacity and lowest electrochemical potential.Unfortunately,an unstable and non-uniform solid electrolyte interphase (SEI) d
【机 构】
：
Department of Chemistry, Southern University of Science and Technology(SUSTech), Shenzhen 518055, Gu
论文部分内容阅读
Li metal has been regarded as one of the most promising anodes for high-energy-density storage systems due to its high theoretical capacity and lowest electrochemical potential.Unfortunately,an unstable and non-uniform solid electrolyte interphase (SEI) deriving from the spontaneous reaction between Li metal anode and electrolyte causes uneven Li deposition,resulting in the growth of Li dendrites and low Coulombic efficiency,which have greatly hindered the practical application of Li metal batteries.Thus,the construction of a stable SEI is an effective approach to suppress the growth of Li dendrites and enhance the electrochemical performances of Li metal anode.In this review,we firstly introduce the formation process of inferior SEI of Li metal anode and the corresponding challenges caused by the unstable SEI.Next,recent progresses to modify SEI layer through the regulation of electrolyte compositions and exsitu protective coating are summarized.Finally,the remained issues,challenges,and perspectives are also proposed on the basis of current research status and progress.
其他文献
Crystal structure and crystallinity of carbon nitride support, size and dispersity of active-metal nanopar- ticles (NPs), and surface engineering of composites have great roles in generation and separation of photogenerated charge carries and photocatalyz
In order to obtain high power density,energy density and safe energy storage lithium ion batteries (LIB)to meet growing demand for electronic products,oxide cathodes have been widely explored in all-solidstate lithium batteries (ASSLB) using sulfide solid
Prussian blue analogue (PBA) material is a promising cathode for applications in Na-ion and K-ion batteries which can support high c-rates for charge and discharge.In this study,the material of composition [K2CuⅡFeⅡ(CN)6] was synthesized and its structura
This work demonstrates the outstanding performance of alloyed Au1 Pt1 nanoparticles on hydrogen oxidation reaction (HOR) in alkaline solution.Due to the weakened hydrogen binding energy caused by uniform incorporation of Au,the alloyed Au1 Pt1/C nanoparti
The microstructure of polymer electrolyte membranes plays a key role in ion conductivity and water transport.Herein,fluorinated poly(aryl ether)s with tetra-alkylsulfonate side chains (SFPAEs) have been successfully synthesized from the copolymerization o
In this paper, a novel copper-based catalyst for FCC gasoline improving the ability of removal the sulfur and avoiding the loss of the octane number from olefin saturation by reactive adsorption desulfuriza- tion (RADS) was investigated. The series of Cu/
Here, we report the synthesis of hard carbon materials (RH) made from natural rice husk through a sin- gle pyrolysis process and their application as an anode in sodium-ion batteries. The studies show that the electrochemical properties of RHs are affecte
A new route was developed for the synthesis of renewable decalin with cyclopentanone which can be de- rived from lignocellulose. It was found that 1,2,3,4,5,6,7,8-octahydronaphthalene could be selectively pro- duced by the hydrogenation/dehydration/rearra
To obtain the electrocatalyst with an improved electrocatalytic performance towards formic acid electrooxidation (FAEO),a simple impregnation method is used to prepare Pt3Ni nanoparticles loaded on carbon black,assisted with electrochemically dealloying p
Protonic ceramic electrolysis cells (PCECs),which permit high-temperature electrolysis of water,exhibit various advantages over conventional solid oxide electrolysis cells (SOECs),including cost-effectiveness and the potential to operate at low-/intermedi