【摘 要】
：
A new composition of Portland cement clinker was studied, in which KH, SM and IM was 0.98,2.4 and 2.4 respectively as well as its meal added 1%CuO (in mass). Fi
【机 构】
：
College of Material Science and Engineering ,Center of Physical Testing and Chemical Analysis
【出 处】
：
武汉理工大学学报（材料科学版）（英文版）
论文部分内容阅读
A new composition of Portland cement clinker was studied, in which KH, SM and IM was 0.98,2.4 and 2.4 respectively as well as its meal added 1%CuO (in mass). Fired at 1 200 ℃,1 350 ℃,1 400℃ and 1 450 ℃ for 30 min, the resultant mineral phases component and mineral morphology were analyzed.The performances of the cement which was made of clinker burned at 1 450 ℃ and fly ash were determined. By means of QXRD, XRD and optical microscopy, it is shown that the clinker burnt at 1 450 ℃ has the larger size crystals and distinct crystal interface, in which the C3S content is 73.37% and the mineral phases is dominantly C3S, following by minor C2S, C3A and tetracalcium aluminoferrite. The results reveal that a new type of high C3S content clinker can completely be made by traditional temperature-time schedule. The performances of the cement produced from this clinker with addtion of 50% fly ash and 5% gupsum were in agreement with the 32.5 strength grade of Portland fly-ash cement. The results also show that the clinker has a significant effect of saving energy and utilizing waste slag.
其他文献
In order to investigate the temperature distribution, a three-dimensional finite element model (FEM) was developed to simulate the temperature regime in the cha
Mechanism interaction between cracks with different orientation angles is analyzed based on the principle of superposition and a flattening method. It is found
By using the theory of planar dynamical systems to the ion acoustic plasma equations, we obtain the existence of the solutions of the smooth and non-smooth soli
This paper presented the methods of reducing the compaction segregation of asphalt layer by improving the operating characteristics of roller and paver. The fit
Cu-based powder metallurgy brake materials are used for aircraft widely and successfully. The characteristics of worn surface of Cu-based powder metallurgy brak
In this paper we investigate a variant of the scheduling problem on two uniform machines with speeds 1 and s. For this problem, we are given two potential unifo
The phase-transition point temperature and microstructure of CuAlBi alloy were analysed by DSC, metallographic examination, XRD and SEM/EDS, and the effect of h
To investigate the frost-heave properties of silty clay under the combination action of seasonal freezing and artificial freezing, and verify the feasibility of
The optimum coating composition of alkali Fe powder welding rods was designed by orthogonal experiment with mix rates. A new kind of effective RE-Fe powder weld
To reduce the variations of the production process in penicillin cultivations, a rolling multivariate statistical approach based on multiway principle component