【摘 要】
：
A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented. Ef
【机 构】
：
School of Mechanical Engineering,Corrosion and Protection Centre,Zibo Institute of New Materials
论文部分内容阅读
A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented. Effects of different laser operating parameters and furnace-annealing conditions on microstructures, in terms of crystallisation, pores formation and grain growth, were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution. The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix, depending on annealing temperatures, whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates. Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions. Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion, grain sizes of both Ni and Ni3P phases, pores formation and residual stresses.
其他文献
The present work focuses on a new method combining cast-infiltration with thermal spraying technology to improve the surface corrosion resistance of magnesium a
The influence of Ce on solid solution and aging process of AZ91D magnesium alloy was analyzed.The results showed that the decomposition of β-Mg17Al12 phase in
The amount of Cu coating by chemical plating was investigated based on quadratic regression orthogonal experimental design being adapted to the variation law of
The research trend in rare earths has been studied using the Chemical Abstracts (CA) data. The number of papers published from China has been increasing very ra
The concentration and variational trend of As3+ and As5+, the bacterial resistance for the As3+ and As5+ and converting conditions from As3+ to As5+ were analyz
In many circumstances, dissimilar metals have to be bonded together and the resulting joint interfaces must typically sustain mechanical and/or electrical force
The effects of superheating temperature on the grain refining efficiency of Ti existing in electrolytic low-titanium aluminum (ELTA) without and with the Al-4B
The electronic structure and optical properties of novel Na-hP4 high pressure phase at different pressures (260, 320, 400 and 600 GPa) were investigated by the
A ligand,5-nitro-1,10-phenanthroline(phenNO2),was synthesized.Its Eu(Ⅲ) complex with 2-thenoyltrifluoroacetone(HTTA) was prepared and characterized by elementa