【摘 要】
：
The hot dipping process of pure aluminum on H13 steel substrates followed by plasma electrolytic oxidation(PEO)was studied to form alumina ceramic coatings for
【机 构】
：
College of Materials Science and Engineering,National Engineering Research Center for Magnesium Allo
论文部分内容阅读
The hot dipping process of pure aluminum on H13 steel substrates followed by plasma electrolytic oxidation(PEO)was studied to form alumina ceramic coatings for protective purpose.H13 steel bars were first dipped in pure aluminum melts,and then,a reactive iron-aluminum intermetallic layer grew at the interface between the melt and the steel substrate.The reactive layer was mainly composed of intermetallic Fe-Al(Fe2Al5); the thickness of aluminum layer and Fe-Al intermetallic layer were mainly influenced by dipping time(1.5～12.0 min)and dipping temperature(710～760 ℃).After PEO process,uniform Al2O3 ceramic coatings were deposited on the surface of aluminized steel.The element distribution,phase composition and morphology of the aluminized layer,and the ceramic coatings were characterized by SEM/EDS and XRD.The distribution of hardness across the composite coating is demonstrated,and the maximum value reaches 1864 HV.The thermal shock resistance of the coated sample is also well improved.
其他文献
The plastic deformation and fracture processes of Ti-3Zr-2Sn-3Mo-25Nb alloy for surgical implants were directly observed by in situ scanning electron microscopy
A joint solution model of variable-mass flow in two-phase region and fluid-solid coupling heat transfer,concerned about the charge process of variable-mass ther
In order to research the mechanical characteristics of intact Middle Pleistocene Epoch loess,triaxial shear tests and isotonic compression test of intact Middle
In order to synthesize ZnO nanoparticles economically,industrial-grade zinc sulfate and urea were utilized to synthesize ZnO precursors in a stirred-tank reacto
The superplastic deformation diffusion bonding of 00Cr25Ni7Mo3N duplex stainless steel was performed on a hot simulator.The microstructure of the bonding interf
Casting-cold extrusion technology was presented to fabricate aluminum/copper clad composite,and copper tubes with different sketch sections were designed.The te
A self-adaptive learning based immune algorithm (SALIA) is proposed to tackle diverse optimization problems,such as complex multi-modal and ill-conditioned prob
The effect of Nb doping on the oxygen permeation and stability of SrCo0.8Fe0.2O3-δ(SCFO)was investigated comprehensively.Cubic perovskite phase was formed in S
The 1∶2 subharmonic resonance of the labyrinth seals-rotor system is investigated,where the low-frequency vibration of steam turbines can be caused by the gas
Effect of element cerium (Ce) on microstructure and mechanical properties of Al-Zn-Mg-Cu alloys has been investigated by transmission electron microscopy (TEM),