论文部分内容阅读
就目前来说,用CCD作为传感器的便携式型数码相机和用CMOS作为传感器的单反数码相机,初始拍摄的照片质量比较胶片(尤其是反转片),在分辨率、反差、颜色饱和度、锐度、色彩还原等反面还是有一定差距,尤其是1200万像素以下的数码相机。我们可以通过购买较高像素(1500万以上)和具有自动设置胶片风格的相机(如富士S3)来弥补这个差距,如果条件不允许,就需要在后期靠熟练掌握Photoshop处理照片的软件来有效去掉数码照片发灰、饱和度低等通病,明显地提高照片质量。对此我们称之“六招”,其中包括摄前两招和后期四招,下面逐一介绍。
For the time being, a digital camera with a CCD as a sensor and a digital SLR camera with a CMOS sensor are used for initial comparison of the picture quality with the film (especially the reversal film) in terms of resolution, contrast, color saturation, sharpness Degree, color reproduction and other negative or there is a certain gap, especially 12 million pixels below the digital camera. We can make up for this gap by buying higher-pixel (15 million+) and auto-styled cameras (such as Fuji S3) that can be effectively eliminated later by using software that handles Photoshop processing photos, if conditions do not permit Digital photos gray, low saturation common problems, significantly improve photo quality. We call this “six strokes”, including the first two strokes and the latter four strokes, the following one by one.