论文部分内容阅读
据《矿物工程》报道,粉碎过程消耗的电能占全世界总耗电最的3％。由于我们意识到能源会变得越来越昂贵,因此,就有理由对破碎作业的能耗特别加以注意,并尽可能提高破碎作业的效率。高压辊机的主要用户中有水泥生产厂家及选矿业,因此,70年代至80年代Schōnert教授开发出高压辊磨机后,水泥业最先采用,并且在目前应用最广,就不会令人感到奇怪了。
According to “Mineral Engineering” reported that the energy consumed by the crushing process accounted for 3% of the world’s total electricity consumption. As we realize that energy will become more and more expensive, it is reasonable to pay special attention to the energy consumption of broken operations and to maximize the efficiency of broken operations. Among the major users of high-pressure rollers are cement manufacturers and the mineral processing industry. Therefore, after Professor Schönert developed a high-pressure roller mill from the 1970s to the 1980s, the cement industry was the first to adopt it and it is not widely used at present Strange.