论文部分内容阅读
为了满足生产发展的需要,结合产品成批性和多样化,在三结合的基础上,我们把一台旧车床,改装成了一台带有双轴传动头的万能机床。图1所示即为其结构。它共由双轴传动头8和万能分度台10两个部件组成。把以上两部件分别安装在车床的相应位置,就可对一系列不同类型的盘类件进行加工。1.部件的安装:(1)双轴传动头的安装如图1。主动轴6的莫氏锥柄和主轴7锥孔相配合,并以拉杆2拉紧。传动头的外壳卡箍头3,通过螺栓5夹紧在主轴轴承
In order to meet the needs of the development of production, combined with product batch and diversification, we converted an old lathe into a universal machine with two-axis transmission head on the basis of three combinations. Figure 1 shows the structure. It consists of a total of two-axis transmission head 8 and universal indexing table 10 composed of two components. The above two parts were installed in the corresponding position on the lathe, you can on a series of different types of disc parts for processing. 1. Parts installation: (1) biaxial transmission head installation shown in Figure 1. The drive shaft 6 Morse taper shank and spindle cone 7 matched, and the tension rod 2 tension. Drive head shell clamp head 3, through the bolts 5 clamped on the spindle bearings