论文部分内容阅读
一般来说,检修行偏转短路等故障应整体更换,但价高而不易买到各种参数与原机一致的配件。本人采用简易模具重新绕制,获得成功,材料费不过4～5元,在偏僻地区应用这项技术,可使一些机器起死回生,效果与原机一样,下面介绍具体方法: 一、简易模具的制作外模用两块厚为0.8～1cm,长、宽为12×10cm光滑木板,找准对角线交点钻直径为12mm左右眼,使之能穿过绕线机中心轴。里模的制作:取厚度为2mm硬壳板,按原线圈最
In general, maintenance line deflection short circuit and other faults should be replaced as a whole, but the price is not easy to buy a variety of parameters consistent with the original machine accessories. I use a simple re-winding system, the success of the material costs, but 4 to 5 yuan, in remote areas of the application of this technology can make some machines back to life, the same effect with the original machine, the following specific methods: First, the production of simple mold Outside the mold with two thick 0.8 ~ 1cm, length, width of 12 × 10cm smooth wood, find the diagonal intersection drill diameter of about 12mm, so that it can pass through the central axis of the winding machine. Mold in the production: Take the thickness of 2mm hard shell, according to the most of the original coil