论文部分内容阅读
装配带插入式刀齿端铣刀使用的方法,不能保证必要的精度,因为刀齿的高度用划线盘进行调节,而直径的调节则靠目力进行,并且刀齿在刃磨工序上要花费硬质合金可用部分的25%。本万能夹具可提高直径125、160和200毫米端面铣刀的装配精度。直径125毫米的铣刀体2装在轴6上,而直径160和200毫毫米的铣刀则用装在同一轴上的过渡套8定心。在板7上紧
The method of assembly with the insert cutter end mill does not guarantee the necessary accuracy because the height of the cutter tooth is adjusted with a scribing disc and the adjustment of the diameter is carried out by eyesight and the cutter tooth is spent on the sharpening process Carbide available part of 25%. This universal fixture increases the assembly accuracy of 125, 160 and 200 mm diameter end mills. Milling cutter body 2 with a diameter of 125 mm is mounted on shaft 6 while milling cutters with diameters of 160 and 200 mm are centered on a transition sleeve 8 mounted on the same shaft. Tight on the plate 7