论文部分内容阅读
这个人物模型是田官1/16系列的第二个产品加兰德飞行员。第一个人物是潘泽尔坦克车长。整个人物由框架上的19个注塑成型的灰色部分组成。身体的两部分用氰基丙烯酸盐黏合剂黏合以增加强度,用胶量稍多盖住拼缝,干后用锉去去,使用砂纸打磨,消除拼接的痕迹。手臂上的模具痕迹要打磨掉,然后在身体主干部分组合的同时也粘在身体主干上。最后把已经组合好的飞行靴与躯干结合好。飞行小队长的基本形象完成。经过一系列修补后、制作人用哈尔福德白色汽车底漆涂装人物脸部。然后,用喷笔把白色、黄色、红色和
This character model is the second product of the Tianda 1/16 series, Garland Pilot. The first character is Panzer tank captain. The entire character consists of 19 injection-molded gray parts on the frame. Two parts of the body with cyanoacrylate adhesive bonding to increase strength, with a little more glue to cover the patchwork, dry with a file to go after the use of sandpaper polished to eliminate stitching traces. Mold marks on the arm should be polished, and then in the trunk part of the body also stick to the trunk. Finally, the combination of good flight boots and torso well. The basic image of the flying captain completed. After a series of patches, the producer paints the face of the character with a Harford white car primer. Then, with a spray pen to white, yellow, red and