论文部分内容阅读
由中国航天科技集团公司研制的嫦娥三号探测器,9月12日运抵西昌卫星发射中心,标志着奔月之旅迈出关键一步。9月11日凌晨,嫦娥三号探测器各部件被装上货运拖车,从五院出发,运往首都机场。之后,嫦娥三号探测器搭乘大型专用货机运抵西昌。嫦娥三号各部件装机后,除不能过于颠簸外,对温度也有要求,工作人员在集装箱上安装了调节温度和预防颠簸的设备。卸机后,发射试验队队员除了需要对嫦娥三号探测器运输状态进行检查、确认,还要进行一些部件性能的测试;抵
The Chang’e III probe, which was developed by China Aerospace Science and Technology Corporation, arrived at Xichang Satellite Launch Center on September 12, marking a crucial step toward the journey to the moon. In the early hours of September 11, Chang’e III detector components were loaded onto freight trailers and departed from five homes and transported to the Capital Airport. After that, Chang’e III rocket arrived in Xichang by a large special cargo plane. Chang’e III after the installation of various components, in addition to not be too bumpy, but also on the temperature requirements, the staff installed on the container to adjust the temperature and prevent bumpy equipment. After unloading, in addition to launch test team members need to Chang’e III probe transport status check, confirm, but also to carry out some component performance test; arrived