Water takeoff performance calculation method for amphibious aircraft based on digital virtual flight

来源 :中国航空学报(英文版) | 被引量 : 0次 | 上传用户:nanti
下载到本地 , 更方便阅读
声明 : 本文档内容版权归属内容提供方 , 如果您对本文有版权争议 , 可与客服联系进行内容授权或下架
论文部分内容阅读
Owing to the strong coupling among the hydrodynamic forces, aerodynamic forces and motion of amphibious aircraft during the water takeoff process, the water takeoff performance is difficult to calculate accurately and quickly. Based on an analysis of the dynamics and kinematics characteristics of amphibious aircraft and the hydrodynamic theory of high-speed planing hulls, a suitable mathematical model is established for calculating the hydrodynamics of aircraft during water takeoff. A pilot model is designed to illustrate how pilots are affected by the lack of visual reference and the necessity to simultaneously control the pitch angle, flight velocity and other parameters during water takeoff. Combined with the aerodynamic model, engine thrust model and aircraft motion model, a digital virtual flight simulation model is developed for amphibious air-craft during water takeoff, and a calculation method for the water takeoff performance of amphibi-ous aircraft is proposed based on digital virtual flight. Typical performance indicators, such as the liftoff time and liftoff distance, can be obtained via digital virtual flight calculations. A comparison of the measured flight test data and the calculation results shows that the calculation error is less than 10%, which verifies the correctness and accuracy of the proposed method. This method can be used for the preliminary evaluation of airworthiness compliance of amphibious aircraft design schemes, and the relevant calculation results can also provide a theoretical reference for the formu-lation of flight test plans for airworthiness certification.
其他文献
建筑管理存在多样化以及系统化等特点,要针对建筑工程施工企业的实际发展情况和行业特点等内容进行管理,针对时代发展特点和行业发展趋势等内容不断进行创新,为提升建筑企业
  本文利用水平热壁式CVD外延炉开展了SiC热分解法制备石墨烯薄膜的实验,主要研究了不同的真空热处理时间对石墨烯薄膜生长的影响。SiC衬底的氢气在线刻蚀处理和热分解在同
对于建筑工程项目的建造施工的整个环节,可以说工程项目的施工管理工作是极为关键和重要的,这是整个工程项目的建造施工的质量和安全的一个基础和前提.只有采取切实可行的手
  光电池片输出光电流与入射光强的余弦关系是模拟式太阳敏感器测量的基础,模拟式太阳敏感器是由至少三个光电池片组成的一种太阳敏感器,因功耗小、成本低、结构简单,在微小卫
会议
  受抛光过程和环境沾污的影响,InP单晶衬底表面含有过高浓度的残留硅杂质。在外延器件中,硅杂质作为浅施主会在界面处形成n型导电层,增加器件的寄生电容,从而降低了器件运
土建工程的项目类型相对复杂,可以看成综合性建设项目的一部分,还可以看成是单独的建设项目.在实际施工中,地理环境、内部管理情况、相邻施工项目等都会对施工质量和项目进度
  稀磁半导体可以同时利用载流子的自旋和电荷属性,为构造集磁、电于一体的自旋半导体器件奠定基础。本文采用基于密度泛函理论的第一性原理计算了过渡金属掺杂石墨烯超胞系
  使用基于密度泛函理论的第一原理赝势法,计算了纤锌矿理想4H-SiC及含有(1/c)本征缺陷的电子结构,分析了其能带结构和电子态分布。计算结果表明:K会引入新的杂质能级,与其成键
近几年,我国的建筑、市政以及绿化等基础设施建设,受惠于整体施工管理水平的巨大进步,以及工程细致化管理的需求,使得建筑节能与建筑造价管理备受关注,使之得到了迅速的发展.
  双极晶体发光管(LET)是一种基区发光的双极型晶体管,它结合了PN结LED的发光功能与晶体管的快速开关功能。从而可望实现一种应用于低成本短距离光通信的高速光源。然而,LE