论文部分内容阅读
为了使多次迭加得到较好的效果,要求爆炸讯号的波形稳定、讯号准确、不超调。为此我们采取了下列措施。一、波形稳定我们学习了2148队的经验,在爆炸放大器与调制器中间加一双稳态线路。借用仪器中触发延迟器中的双稳态电路,通过抽屉中的空脚连接起来,从触发延迟器中双稳态的Q_1集电极引至爆炸调制器入口耦合电容。因为触发延迟器中的双稳态线路只能接受第一次正脉冲的翻转,后来的讯号不能使
In order to make multiple iterations get better results, require the waveform of the explosion signal is stable, the signal is accurate, not overshoot. To this end we have taken the following measures. First, the stable waveform We learned the experience of the 2148 team, in the middle of the explosion amplifier and modulator plus a pair of steady-state lines. Borrowing bistable circuits in the instrument’s trigger delay, connected through the empty feet in the drawer, lead from the bistable Q_1 collector in the trigger delay to the entrance of the explosive modulator coupling capacitor. Because the bistable line in the trigger delay can only accept the first positive pulse, the later signal can not be used