论文部分内容阅读
Pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) was employed to achieve fast pyrolysis of biomass and on-line analysis of the pyrolysis vapors. Four biomass materials (poplar wood, fir wood, cotton straw and rice husk) were pyrolyzed to reveal the difference among their products. Moreover, catalytic cracking of the pyrolysis vapors from cotton straw was performed by using five catalysts, including two microporous zeolites (HZSM-5 and HY) and three mesoporous catalysts (ZrO2&TiO2, SBA-15 and Al/SBA-15). The results showed that the distribution of the pyrolytic products from the four materials differed a little from each other, while catalytic cracking could significantly alter the pyrolytic products. Those important primary pyrolytic products such as levoglucosan, hydroxyacetaldehyde and 1-hydroxy-2-propanone were decreased greatly after catalysis. The two microporous zeolites were ef-fective to generate high yields of hydrocarbons, while the three mesoporous materials favored the formation of furan, furfural and other furan compounds, as well as acetic acid.
Pyrolysis-gas chromatography / mass spectrometry (Py-GC / MS) was employed to achieve fast pyrolysis of biomass and on-line analysis of the pyrolysis vapors. Four biomass materials (poplar wood, fir wood, cotton straw and rice husk) were pyrolyzed to reveal the difference among their products. Moreover, catalytic cracking of the pyrolysis vapors from cotton straw was performed by using five catalysts, including two microporous zeolites (HZSM-5 and HY) and three mesoporous catalysts (ZrO2 & TiO2, SBA- 15 and Al / SBA-15). The results showed that the distribution of the pyrolytic products from the four materials differed a little from each other, while catalytic cracking could significantly alter the pyrolytic products. Those important primary pyrolytic products such as levoglucosan, hydroxyacetaldehyde and 1-hydroxy -2-propanone were reduced greatly after catalysis. The two microporous zeolites were ef-fective to generate high yields of hydrocarbons, while the three mesoporous materials favored the formation of furan, furfural and other furan compounds, as well as acetic acid.