论文部分内容阅读
铸件清理机械化机组用粗加工砂轮在小批量或批量生产条件下实现了对铸件赘瘤、浇冒口余根和粘砂清除的机械化过程。机组的主要部分有:机身、粗加工机头、纵横转向架、翻件机、控制台、操纵室、液压装置、电气装置和除尘器。砂轮修整铸件表面,砂轮固定在粗加工机头上。粗加工机头可以对直角形铸件的六个表面进行加工。对于铸件在翻件机上的装卸均用装置在车间里的起重机来进行。同类型机组的主要区别在于机组的翻件机上。在99911M型机组中,翻件机有升降旋转台。铸件固定在台面上,夹在两块支撑垫的齿板上,因此,要等
Casting clean-up mechanized unit with roughing wheel in the small batch or batch production conditions to achieve the casting of neoplasm, pouring riser and sticky grit removal mechanized process. The main part of the unit are: body, roughing head, vertical and horizontal bogies, turn over machine, console, control room, hydraulic equipment, electrical equipment and dust collector. Wheel dressing casting surface, the wheel fixed in the roughing head. Roughing heads allow for the machining of the six faces of a right-angled casting. Loading and unloading of the castings on the turn-up machine is carried out by means of a crane mounted in the workshop. The main difference between the same type of unit is the unit’s turnaround machine. In the 99911M-type unit, turning machine has lifting turntable. Castings fixed on the table, sandwiched between the teeth of the two support pads, so wait