论文部分内容阅读
框架工程填充墙为后砌墙,为保证填充墙的整体性和抗震要求,抗震规范要求填充墙外墙长度大于4m(7度及以下不大于5m),应在墙长范围内按净距不大于4m(7度及以下不大于5m)及内外墙交接处要增加构造柱。填充内墙当墙长大于2倍层高或大于8m时,应在墙长范围内按不大于2倍层高及8m设置构造柱,并优先在纵横墙相交处或洞边设置。高度大于4m时在墙中部增设一道压梁。施工时,填充墙一般采用空
In order to ensure the integrity of the infill wall and the seismic requirements, the seismic code requires that the outer wall of the infill wall should be longer than 4m (7 ° and up to 5m) More than 4m (7 degrees and below not more than 5m) and the external wall junction to increase the structural column. Fill the inner wall When the wall is greater than 2 times the length of the storey or greater than 8m, the columns should be constructed in the length of the wall at not more than 2 times the storey height and 8m, preferentially at the intersection of the vertical and horizontal walls or the edge of the hole. When the height is more than 4m, a pressure beam is added in the middle of the wall. Construction, filling the wall generally used empty