论文部分内容阅读
The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation,however,there are little researches focusing on the effect of machine center elastic deformations on workspace volume.Therefore,a method called pre-deformation for assembly performance is presented.This method is technically based on the characteristics of machine tool assembly and collaborative computer-aided engineering(CAE)analysis.The research goal is to enhance assembly performance,including straightness,positioning,and angular errors,to realize the precision of the machine tool design.A vertical machine center is taken as an example to illustrate the proposed method.The concept of travel error is defined to obtain the law of the guide surface.The machine center assembly performance is analyzed under cold condition and thermal balance condition to establish the function of pre-deformation.Then,the guide surface in normal direction is processed with the pre-deformation function,and the machine tool assembly performance is measured using a laser interferometer.The measuring results show that the straightness deviation of the Z component in the Y-direction is 158.9%of the allowable value primarily because of the gravity of the spindle head,and the straightness of the X and Y components is minimal.When the machine tool is processed in pre-deformation,the straightness of the Z axis moving component is reduced to 91.2%.This research proposes a pre-deformation machine center assembly method which has sufficient capacity to improving assembly accuracy of machine centers.
The current research of machine center accuracy in workspace mainly focuses on the poor geometric error subjected to thermal and gravity load while in operation, however, there are little researches focusing on the effect of machine center elastic deformations on workspace volume. Beforefore, a method called pre-deformation for assembly performance is presented. This method is technically based on the characteristics of machine tool assembly and collaborative computer-aided engineering (CAE) analysis. The research goal is to enhance assembly performance, including straightness, positioning, and angular errors, to realize the precision of the machine tool design. A vertical machine center is taken as an example to illustrate the proposed method. concept of travel error is defined to obtain the law of the guide surface.The machine center assembly performance is analyzed under cold condition and thermal balance condition to establish the function of pre-deformation.Then, the guide surface in normal d irection is processed with the pre-deformation function, and the machine tool assembly performance is measured using a laser interferometer. The measuring results show that straightness deviation of the Z component in the Y-direction is 158.9% of the allowable value. the gravity of the spindle head, and the straightness of the X and Y components is minimal. When the machine tool is processed in a pre-deformation, the straightness of the Z axis moving component is reduced to 91.2% deformation machine center assembly method which has sufficient capacity to improve assembly accuracy of machine centers.