论文部分内容阅读
中型桩景《伟岸如汉》(见图1)高75厘米,宽60厘米,基部粗15厘米。此作采用主干刚直的章法,利用原桩坯主干的粗度、力度,见机取势,因桩造型。枝条处理,以刚为主。经四年养护、造型,现在已基本成型。此榔榆生坯于91年4月觅到,当时的桩坯立根过长,主干基部右侧长一粗分枝,左侧上部又长一粗分枝,形态不甚理想(图2)。经锯截后,此桩才脱衣换锦,一改原来面貌,呈现出粗壮有劲的直干大树型形态。
Mid-sized piles of King “Wei shore as the Han” (see Figure 1) Height 75 cm, width 60 cm, the base of 15 cm thick. This for the backbone of the rigid chapter method, the use of the original pile billet trunk thickness, strength, see the opportunity to take advantage of the pile shape. Branch processing, mainly to the main. After four years of conservation, modeling, is now the basic shape. The betel nut was found in April 1991, when the pile billet was too long and the stem base had a long, thick branch on the right and a long, thick branch on the left, which was not quite ideal (Figure 2). After sawing, the pile was only unrolled for Kam, a change of the original appearance, showing a sturdy straight tree shape.