【摘 要】
：
The movement of the floating connecting mechanism between a hydraulic support and scraper conveyor is space movement;thus,when the hydraulic support pushes the scraper conveyor,there is an error between the actual distance of the scraper conveyor and the
【机 构】
：
Shanxi Key Laboratory of Fully Mechanized Coal Mining Equipment,College of Mechanical and Vehicle En
论文部分内容阅读
The movement of the floating connecting mechanism between a hydraulic support and scraper conveyor is space movement;thus,when the hydraulic support pushes the scraper conveyor,there is an error between the actual distance of the scraper conveyor and the theoretical moving distance.As a result,the scraper conveyor cannot obtain the straightness requirement.Therefore,the movement law of the floating connecting mechanism between the hydraulic support and scraper conveyor is analyzed and programmed into the Unity3D to realize accurate pushing of the scraper conveyor via hydraulic support.The Coal Seam + Equipment Joint Virtual Straightening System is established,and a straightening method based on the motion law of a floating connection is proposed as the default method of the system.In addition,a straightening simulation of the scraper conveyor was performed on a complex coal seam floor,the results demonstrate that the average straightening error of the scraper conveyor is within 2-8 mm,and is in direct proportion to the fluctuation of the coal seam floor in the strike of the seam with high accuracy,the straightness of scraper conveyor is more affected by the subsidence terrain during straightening than by the bulge terrain.And some conclusions are verified by experiment.Based on the verification of the relevant conclusions,a comparison and analysis of Longwall Automation Steering Committee(LASC) straightening technology and default straightening method in the simulation system shows that the straightness accuracy of LASC straightening technology under complex floor conditions is slightly less than that of the default straightening method in the proposed system.
其他文献
Membrane distillation (MD) is a promising membrane separation technique used to treat industrial wastewater.When coupled with cheap heat sources,MD has significant economic advantages.Therefore,MD can be combined with solar energy to realize the large-sca
At present,non-pillar entry protection in longwall mining is mainly achieved through either the gob-side entry retaining (GER) procedure or the gob-side entry driving (GED) procedure.The GER procedure leads to difficulties in maintaining the roadway in mi
Melina wood torrefied at 260 ℃ for 60 min was agglomerated with lean grade coal fines into composite briquettes using pitch as binder.Torrefied biomass (3％-20％) and coal fines (80％-97％) were blended together to produce the composite briquettes under a hyd
Four coal samples from Jharia basin,India are treated with nitric acid in glacial acetic acid and aqueous media to find out the chemical,petrographic and spatial structure of the organic mass by X-ray diffraction (XRD) and Fourier Transform Infrared Spect
Aiming at the poor location accuracy caused by the harsh and complex underground environment,long strip roadway,limited wireless transmission and sparse anchor nodes,an underground location algorithm based on random forest and compensation for environment
Tri-flo cyclone,as a dense-medium separation device,is one of the most typical environmentally friendly industrial techniques in the coal washery plants.Surprisingly,no detailed investigation has been conducted to explore the effectiveness of tri-flo cycl
An accurate assessment of root respiration in mine reclaimed soil is important for effectively evaluating mining area ecosystems.This study investigated dynamic changes in root respiration and the contribution of root respiration to total soil respiration
Crude phenols extracted using organic solvent from the wastewater of a typical fixed-bed gasification process was used as a raw material,and the distillation range was analyzed.The wide and narrow fractions of the raw material derived from distillation ra
A tool for calculating the economic and environmental impacts of the use of byproducts of industrial processes that can substitute for perishable resources was presented.This was exemplified by fly ash (the fine fraction of ash originating from coal burne
A 72-h ex situ hard coal gasification test in one large block of coal was carried out.The gasifying agent was oxygen with a constant flow rate of 4.5 m3/h.The surroundings of coal were simulated with wet sand with 11％ moisture content.A 2-cm interlayer of