论文部分内容阅读
我厂,生产的高度表内需用许多弯曲成形的同轴电缆SFT-50-3。把处于不同位置的电器部、组件连接起来,使高频信号形成通路。同轴电缆两端接头部分如图1。为了把同轴电缆头部剥切下来达到图纸要求,1983年设计制造如图2的剥头工具,经几年的使用和改进,生产工人认为此工具使用方便,生产效率高:能一次把同轴电缆外面的紫铜屏蔽包皮(厚0.5mm)和塑料绝缘层(厚0.9mm)切割下来,而不伤芯线;符合图纸要求。
I plant, the production of altimeter required a lot of bending the coaxial cable SFT-50-3. The electrical parts in different positions, components connected to form a high-frequency signal path. Coaxial cable ends of the connector shown in Figure 1. In order to strip the head of the coaxial cable to meet the requirements of the drawing, in 1983 designed and manufactured as shown in Figure 2 stripping tool, after several years of use and improvement, the production workers that the tool easy to use, high production efficiency: Copper shield sheath (thickness 0.5mm) and plastic insulation layer (thickness 0.9mm) outside the shaft cable are cut without hurting the core wire; the requirements of drawings are met.