论文部分内容阅读
变位齿轮应用非常广泛,但计算比标准齿轮复杂,特别是角度变位齿轮,计算更显复杂。但当你掌握了角度变位齿轮啮合角与三个系数比λ_0、Σξ_0、σ_0的关系时,就会使计算清楚准确。变位齿轮根据啮合角是否等于刀具齿形角、中心距是否等于标准中心距,来区分高度变位齿轮副或角度变位齿轮副。这两种变位齿轮加工,都是变动刀具的安装位置。即相对加工标准齿轮时刀具安装的位置来说,刀具远
Displacement gear is widely used, but the calculation is more complex than the standard gear, especially the angle change gear, the calculation is more complicated. However, when you master the relationship between the angle of change gear meshing angle and the three coefficient ratio λ_0, Σξ_0, σ_0, the calculation will be clear and accurate. Displacement gear according to whether the angle of engagement is equal to the tool tooth angle, the center distance is equal to the standard center distance, to distinguish between the height of the gear pair or angle gear pair. These two kinds of variable gear machining, are changing the location of the tool installation. That is relative to the processing of standard gear cutter installation position, the tool is far