论文部分内容阅读
喷枪作为最常用的喷涂工具,在日常使用过程中常会遇到各种故障。本文以SATA喷枪为例,列举了几类常见故障现象及其产生原因,以及修复和预防方法,希望有助于解决喷漆技师在喷枪使用过程的困惑。1喷幅变形喷幅变形(图1)主要是由风帽上的气孔(扇形孔或辅助雾化孔)被干固的油漆堵塞,影响了喷枪进气压力造成的。依照清洗说明清洁喷枪及风帽上的气孔,即可排除故障。使用
As the most commonly used spray gun gun, in the course of daily use often encounter various problems. In this paper, SATA spray gun, for example, lists several common symptoms and their causes, as well as repair and prevention methods, hoping to help solve the spray paint technician in the process of gun confusion. 1 Spray deformation Deformation spray deformation (Figure 1) is mainly due to the air cap on the hood (fan-shaped hole or auxiliary atomization hole) is blocked by the dry paint, affecting the gun inlet pressure caused. Follow the cleaning instructions to clean the air holes on the gun and hood to clear the problem. use